国产主播 国内精品 在线_日韩伦人妻无码_无翼乌无遮挡h肉动漫在线观看_亚洲成人av无码喷水_久久国产AV无码专区_欧美另类videosbestsex道具_免费A级毛片无码A∨在线视频_最好看的日韩中文字幕视频_色资源站欧美在线_免费黄影少妇性l交大片

A wide angle of 135°compared with 90° bend angle of a general 3-way ball valve enables the passage of a pig or sphere for cleaning in a pipe.

There are two types of flanges: straight type and 22.5° bent. Various patterns can be selected by combining these two types of flanges in any three places.

The ball and stem are fixed and there is no deviation in opening due to backlash between the ball and valve shaft. In addition, since the radius of curvature of the ball port is 1.5 times or more of the bore diameter, pressure loss is small, and in the case of a highly abrasive fluid, the damage of the ball is less than that of a general 3-way valve.

Spring (cushion rubber for DN100 and metallic spring for DN125 and larger) is provided at the back of the seat, so it is excellent in sealing even if there is temperature-cycle and pressure-fluctuation. The sealing is performed by the seat on the primary side (inlet side). Therefore, the function deterioration due to the inflow of fluid into the pocket part can be reduced.

Since O-rings are used for the sealing parts, the sealing performance is stable and no periodic retightening is required.

Bearings made of specially reinforced PTFE are mounted on the upper and lower shafts of the ball to prevent galling and withstand high-frequency operation.

Two purge holes are provided in the main body to prevent fluid from stagnating c by air charging to the pocket, leak check against seat wear, and purge of fluid remaining in the pocket.

Solid materials such as powder, slurry, pellets, etc., shield method, etc.

Please refer to the catalog, drawings, etc. or contact our sales representative for the details.